One Component Aluminium Corners Connection Urethane Sealing Gum
One component Polyurethane Translucent Adhesive PU-1838
∎Technical Data Table
| PROPERTY PU-1838 |
| Appearance | Translucent |
| Chemical Basis | Polyurethane |
| Cure mechanism | Moisture curing |
| Density | 1.14 ± 0.02 g/cm3 |
| Viscosity | Thixotropic paste |
| Tack free time at 23 ℃ and 50% h.r | ≈ 10’ |
| Clamping Time (h) | 6’ |
| Shear strength by tensile loading (EN 204 – D1) | ≥ 7.5N/mm2 |
| Shear strength by tensile loading (EN 204 – D4) | ≥ 4.5N/mm2 |
| Initial lap shear strength after 3 days | ≈ 3 N/mm2 |
| Chemical resistance | Excellent |
| Humidity and water resistance | Excellent(D4-DIN EN 204) |
| Solid contents | ≥97% (solvent free) |
| Application Temperature | +5°C to +35°C |
| Temperature resistance | -40°C / +100°C after curing |
∎Product Description
● Polyurethane Adhesive Translucent PU-1838 is a one-part, fast-hardening translucent, solvent-free moisture curing polyurethane adhesive which, once hardened, transforms into a very strong-grip adhesive with excellent resistance to water, temperatures, weathering and ageing conditions. Due to the excellent filling properties, it is suitable for use in beading/cord applications.
● PU-1838 Designed for water-resistant bonding of wooden elements where a fast mechanical hold is necessary (10 minutes of clamp hold at room temperature) in order to permit working of hand-manufactured articles.
Suitable for structural strong-grip bonding of wooden elements on both porous and non porous substrates. Particularly useful and practical for high mechanical resistance assembly and outdoor applications.
∎Key Features
● Excellent adhesion on numerous substrates
● Easy-to-use
● Solvent free – Odourless
● Weathering resistance according to DIN 204 D4
● Resistant to ageing
● Resistant to chemicals
● Filling capacity: very good
∎Typical Applications
● Powerful bonding of wood and derived wood products; chipboard, plywood, staircase renovation.
● Chemical anchorage in building construction, for bonding of stones, plasterboard, cement cover and insulation panels
● Powerful bonding in metal construction; aluminium, stainless steel, galvanised steel, copper
● Bonding of corner connections in metal door, windows and facades as well as conservatories.
● Bonding of stone, natural stone, brick and ceramics
● Bonding of synthetic materials; PVC, fibre-reinforced plastics etc.
● Bonding of insulating materials including expanded polystyrene and polyurethane sheets
.
∎Packing Specification
● PE Cartridges 300ml,
● 24pcs per box.
● Color : Translucent
∎ Instructions
●All surfaces to be bonded must be perfectly clean, dry and free from dust, grease, oils and debris.
●Cleaning of non-porous substrates using a lint free cotton cloth and organic solvent. Cleaning of porous substrates using a steel wire brush to remove loose particles.
●Apply PU-1838 on one side with a caulking gun or spread on substrate with a spatula.
The high viscosity holds elements to be bonded in position, the use of clamps however sometimes is
recommended. To achieve optimum performance it is important to have a very thin layer of PU Adhesive Translucent PU-1838 between the substrates, Couple substrates within 2 minutes. Slight moistening of substrates improves curing rate and gap filling characteristics as adhesive foams up to penetrate the bond cavity.
Application
●Designed for water-resistant bonding of wooden elements where a fast mechanical hold is necessary (10 minutes of clamp hold at room temperature) in order to permit working of hand-manufactured articles
●Suitable for structural strong-grip bonding of wooden elements on both porous and non porous
substrates. Particularly useful and practical for high mechanical resistance assembly and outdoor
applications.
General Information
●The information contained in this technical data sheet is to the best of our knowledge correct.
However, by no means can it be considered a guarantee, as usage, working area and application of the product in accordance with the instructions given and their success in application is beyond
our control and is dependent on a number of factors. We decline any responsibility for the improper use of the product as the application recommendations contained herein are to be
considered as a general guideline. If at all in doubt, preliminary tests should be carried out.
We reserve the right to modify and up-date said data sheets without prior notice. Clients are kindly
requested to verify that they are in possession of the current edition.
∎Transport &Storage
● Transport: Keep the sealed product away from moisture, the sun, high temperature and avoid collisions.
● Storage: Keep the sealed product into cool, dry place.
● Storage temperature: 5~25℃. Humidity: ≤50%RH.
●Cartridge : 12 month.
Notice:If the temperature is higher than 40 ℃ or the humidity is more than 80%RH, the shelf life may be shorter.
